Smart Lighting Control Systems Accessory DALI Lighting Control
Module Controller
Smart Lighting Control System Solution
1. Cost and time advantages in planning, installation,
commissioning and reprogramming
2. Improves comfort.
3. High flexibility, extense function at any time
4. DIN rail components and surface mounted devices
5. Input and output combinated various devices.
6. All loads in the room (lights, blinds, heating, etc.) can be
controlled using a central device
DIN Rail DALI Master Controller Specifications
NET | (2) 4-pin 3.81mm detachable terminal blocks, paralleled |
OVERRIDE | (1) 2-pin 3.81mm detachable terminal blocks.Sensing input for
external low-voltage contact closure; Activates override mode when a closure is present, forces each
ballast into its defined “System Failure Level” |
Minimum Closure Rating | 10mA (per module) at 24 Volts |
DALI Interface | (1) 2-pin 7.62mm terminal blocks Each channel controls a single DALI loop (up to 64 ballasts); |
COMPUTER | 1) USB Type B female, USB 1.1 computer console port |
TEST | (6) miniature pushbuttons for testing on/off and dim up/down for
all attached ballasts in channel |
DALI POWER | (1) 2-position switch, sets DALI power between internal (INT) and
external (EXT); When set to “INT” DALI uses power supplied by the DIN-DALI; When set to “EXT” DALI uses power provided by external power supply
(not included) |
LCD Panel | (1) LCD Display Panel for Used for displaying various equipment
information and operation status information |
PWR | (1)Green LED, illuminates when DC power is a applied to the NET
port |
NET | (1)Yellow LED, Indicates communication with an external control
processor |
DIN Rail DALI Master Controller Application
> Support a DALI bus, most allow linking 64 DALI lighting
equipment
> With USB and DC-NET(RS-485) communication interface
> Scan equipments, meet the requirement of automatic address
assignment of DALI agreement and there are 3 ways to assign address
> All the parameters of the parameters table of DALI agreement
can be read or set.
> Support Setting / reading by group;
> Integrated DALI power supply
> Support Scene values can be set/read.
> 8M wide DIN rail mounting
Override Input
An override input is provided to allow an external contact closure
to momentarily override the control system program and force each
ballast into its defined “System Failure Level.” States can be set
and saved locally from the front panel, or remotely via software.
DIN Rail DALI Master Controller Installation
The DIN-DALI is designed to snap onto a standard DIN rail for
installation in a wall mount enclosure. Wiring connections are made
using screw terminals positioned along the top and bottom, clearly
accessible from the front for easy installation and servicing. All
setup controls and indicators are positioned on the center front
panel. When the DIN-DALI is installed in an enclosure utilizing 45
mm cutouts, the front panel stays accessible while the connections
are concealed.
DIN Rail DALI Master Controller Production Line
Company Profile
Okystar Technology Co., Ltd is subsidiary of Okystar Technology
Group Co., Ltd, which holds 4 subsidiary companies and more than
100 skilled workers,5. technicians.Okystar Tech Co.,Ltd was built
in 2004.We mainly manufacture and export lighting control system
including DALI, 0-10V, Leading / Trailing Edge Dimmer, Programmable
Touch Panel and etc.
After 10 years development, our company has grown into a large
high-tech group corporation integrated industry, technology and
trading. With electronic information industry as our main business,
we keep being top 10 in the board, shield, sensor, modules. Now we
launch new lighting control system module which will keep our
competitiveness in the market.
Exhibition
DIN Rail DALI Master Controller Packing & Shipping
FAQ
1. What is intelligent lighting control system?
A lighting control system is an intelligent network based lighting
control solution that incorporates communication between various
system inputs and outputs related to lighting control with the use
of one or more central computing devices. Lighting control systems
are widely used on both indoor and outdoor lighting of commercial,
industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting
control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for
you, economic and customization, with industrial-grade design,
product architecture in line with international electrical
standards, using high-quality components, products are stable and
reliable.
